F-ONE T-NUTS SYNC

Interchangeable Wing Handles System A F-ONE innovation, these are soft handles that are connected to the wing’s webbing by a hard base. Thanks to this hard base, these handles do not deform, offer an ergonomic shape, and are easier to grasp during maneuvers and transitions. These hybrid handles hence provide a more direct feel in your hands for more performance and control, while still fully benefiting from the comfort and grip of the soft handles.Front handle available in 28 / 30 cmBack handle available in 37 cmRef. 77241-2010

Ultra-thin high-performance carbon mast for maximum glide, speed and direct control The F-ONE UHM Carbon Mast 12 is crafted for riders who demand the very best in glide and performance. Developed with an ultra-thin profile and a highly refined construction, this mast is built to maximize speed, efficiency and direct control across demanding foil disciplines. Ultra-thin profile for exceptional glide and top-end speed With a profile measuring just 12 mm at its thinnest point, this mast is designed to minimize drag and maximize glide. Its tapered chord and thickness make it slightly wider and thicker at the top before narrowing toward the fuselage, creating a shape that helps generate more speed and efficiency on the water. This ultra-thin design makes it especially effective for downwind runs, high-speed wing foiling and kite foiling, while also helping riders gain more pop and height during tricks. UHM Carbon layup for increased rigidity and precision The custom Ultra High Modulus (UHM) Carbon layup makes this mast 25% stiffer in bending than the HM Carbon 14 mast. This provides exceptional rigidity and more precise control in both bending and torsion, resulting in a very direct feel underfoot and excellent maneuverability. The UHM Carbon fiber layup is also 1.2x stiffer than High Modulus Carbon and 1.8x stiffer than regular carbon fiber, giving this mast the structural performance needed for such a thin profile. Advanced one-piece construction with optimized internal structure Molded and cured in a single shot from carbon pre-preg, the one-piece construction integrates F-ONE’s optimized SPINE internal structure. This enhances rigidity, efficiency and control, especially through turns, while delivering a higher level of stiffness, precision and overall performance. The use of pre-preg technology ensures an optimized epoxy-to-carbon ratio, resulting in a lighter, stiffer and stronger construction with excellent durability. New TITAN 2 connection and updated top plate The mast features the new top plate and updated TITAN 2 mast foot at the bottom. The redesigned top plate is compatible with lockable T-nuts and includes the keyhole-shaped Quick-Attach System for faster assembly. The TITAN 2 connection improves structural efficiency, rigidity and reliability at the mast-to-foil connection. Built around a reinforced structure using only two M8 screws, it delivers a more direct feel, improved pumping and a stronger foil connection while maintaining excellent hydrodynamic performance. This mast is compatible with virtually all boards on the market featuring the Twin-Tracks system and with all front wings using the TITAN 2 connection. Key features Ultra-thin 12 mm profile Maximum glide and speed Increased rigidity for a direct feel and total control Custom Ultra High Modulus Carbon layup 25% stiffer in bending than the HM Carbon 14 mast Optimized SPINE technology for rigidity, efficiency and control One-piece carbon pre-preg construction New top plate with Quick-Attach System TITAN 2 connection for better structural efficiency and a more direct feel Compatible with Twin-Tracks boards and TITAN 2 front wings Program Efficiency / Glide: 100% Bending Stiffness: 95% Torsion Stiffness: 65% Sizes 75 cm 80 cm 85 cm 95 cm Sold with Three-piece soft cover 4x M6-25 mm tapered head screws 4x T-Nuts M6 User Guide

Interchangeable Wing Handles SystemFor those who need maximal freedom, the Carbon Boom lets you position your hands freely. It’s the perfect option for freestyle. Connected to the wing’s webbing by a hard base, this fixed boom enables an intuitive and committed ride with total control and precision, as well as an ergonomic handling and efficient pumping.Ultra-light and stiff, the boom is built in a pre-preg carbon oval tube and EVA grip. It also features EVA bumpers on all angles to protect both rider and gear from shocks.Each wing size is associated with a corresponding boom size. Carbon Boom available in 78 / 90 / 97 / 106 / 120 cmRef. 77251-2031

ORIGIN/ Available in April 2025 /The Original FeelingThe original feeling remains with the latest ORIGIN wing. True to its name, the ORIGIN embodies the ease and comfort of our original wings, while incorporating all the innovations and advancements we’ve developed over the years.New for this version, the ORIGIN now comes with optimized strap positions, allowing one boom to fit multiple sizes and models across the range for maximum convenience. We have also added a 6.0 m² size, providing even more options for riders to find their ideal setup.An accessible, light, versatile and forgiving wingLegendary pumping and easy take-offsOptimized design for extra lightness and comfortImpressive freefly abilities in light windFantastic stability and maneuverabilityPerfectly suited to rapid progress and fun on the waterAvailable in: 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0 m²Ref. 77251-1101An absolute dream in the low end, the ORIGIN is a super comfortable, light, forgiving, and accessible all-round wing that feels effortless to ride. It allows the easiest take-offs with minimal pumping and with just enough speed to get going. Beginners and experts alike will appreciate its very efficient and intuitive pumping thanks to its flexibility, as well as its super smooth take-offs. This wing is the softest and most comfortable one of our range. The ORIGIN also offers intuitive power delivery with barely any adjustments needed once in the air. Simply sheet in and let it make you foil away. Its controlled speed allows you to ride without excessive effort or fatigue. The ORIGIN is for everyone. It is the ideal choice for riders looking to spend long hours on the water, those who ride larger foils and boards and need easy power for planing starts, or for beginners looking for a high-quality wing with great potential to evolve and progress. Its lightness truly sets it apart from our other wings, making it also perfect to freefly in the low end. The ORIGIN is a great addition to your quiver as a light-wind wing. Design: The ORIGIN’s design has been optimized to guarantee as much lightness and comfort as possible. With our staggered seams, the fabric and its seams work better to keep a smooth and efficient profile and to reduce the deformation of the wing’s shape under load. The control of the profile is ideal to guarantee total stability and comfort during the ride. Small radial cuts are implemented on the wingtips and on the back of the strut to spread tensions. Aligning the fibre exactly along the load paths means that stretch can be controlled to a never-before-seen level on a wing. Located on the back of the strut, our refined Load Diffuser made of overlapping panels of hard Mylar and Dacron further helps maintaining the profile sleek and efficient, leading to the ultimate stability, performances, and longevity. The strut and the two central segments of the leading edge on each side of the strut are made of HITEX 158g. This high tenacity polyester offers great resistance to elongation and therefore greater durability and performances. The remaining segments of the leading edge are made of Dacron 150g to guarantee lightness and comfort. The ORIGIN’s canopy is in TECHNOFORCE™/D2 in 52g, while the thicker TECHNOFORCE™/D2 in 66g is on the trailing edge. These materials are perfectly distributed to account for the different tensions, high pressures, and weight distribution of each area. The central strut is completely straight, which allows us to better control its deformation and possible twisting, while reducing drag. As a result, the infill is a bit lower and deforms less, and is extended almost all the way to the back. Combining fantastic stability and effortless maneuverability, the ORIGIN is a versatile wing perfectly suited for rapid progression and endless fun on the water.

F-ONE Foil Technology Monobloc Tail DW Feel the connection. Die neuen Monobloc Tails DW wurden entwickelt, um deine Downwind-Sessions mit mehr Glide, Kontrolle und Effizienz zu maximieren. Durch die verfeinerte Outline und den längeren Fuselage bieten sie eine perfekte Balance aus Stabilität und Vorwärtsdrang für High-Performance Foiling unter allen Bedingungen. Optimiert für erfahrene Downwind-Rider Entwickelt für hohe Geschwindigkeiten und Offshore-Surfing Längerer Fuselage = Höhere Pitch-Stabilität Maßgeschneidert für SEVEN SEAS und EAGLE X Frontwings Monobloc Tail Die Monobloc-Konstruktion verbessert die Steifigkeit und reduziert Turbulenzen, indem sie unnötige Verbindungen und Schrauben eliminiert. Das Ergebnis ist ein extrem stromlinienförmiges Design und ein direktes Fahrgefühl. UHM Carbon Das Ultra High Modulus Carbon Layup sorgt für maximale Steifigkeit und sofortiges Feedback. Perfekt für Rider, die keine Kompromisse bei der Präzision und Kontrolle eingehen wollen. Technical Specifications Size Area (cm²) Span (cm) Aspect Ratio Weight (kg) 136 XS DW 136 35 9.0 0.24 156 XXS DW 156 37.5 9.0 0.24 176 XXS DW 176 40 9.1 0.25 Recommended Plane / Setup Monobloc Tail 136 XS DW 156 XXS DW 176 XXS DW First Choice(Recommended) EAGLE X 500 / 600EAGLE X 700 / 800 EAGLE X 900EAGLE X 1000 - Second Choice(Level dependent) Seven Seas 1100 / 1200Eagle 690 / 790 / 890Momentum 516 / 616 / 716 Seven Seas 1100 / 1200 / 1300Eagle 1090Momentum 816 Seven Seas 1400 / 1500 / 1600Eagle 1190 / 1290Momentum 916 Sold With / Lieferumfang 1x MONOBLOC TAIL DW (in gewählter Größe) 1x Soft Cover (Schutzhülle) Packaging Kit: 2x M6-25mm tapered head screws (Schrauben) CURRENT TECHNICAL SPECIFICATIONS! ALL RIGHTS RESERVED TO IMPROVE / MODIFY / CHANGE ANY PRODUCT AT ANY TIME!

The Majestic Fullsuit 4/3mm is the pinnacle of our men’s wetsuit range. Upgraded with Yamamoto 40 panels at the chest and arms, it pushes flexibility further, giving you freedom of movement where you need it most. The outer layer is built from a new blend of stretch fabric with a ridged channel construction for durability, rebound, and faster drying between sessions. Inside, the suit is lined top to bottom with Fox Fleece Ultra – our softest, warmest thermal lining yet – made with 50% recycled content and a two-tone finish. Finished with watertight seam taping, refined paneling, and a front-zip entry, the Majestic delivers performance, comfort, and warmth season after season.FeaturesWaterproof stretch taping (100%): all seamsGBS (Glued Blind Stitched)YKK Front-zipAquabarrierBack knee embossHex-tech kneepadsNon slip cuffsHeat sealed cuff edgesKey pocketAquaflush 2.0Easy entrySeamless waist areaMaterialienYamamoto 40Fox Fleece UltraChannel flex

Infos & Characteristics Having one leash on your wrist and the other one on your ankle can be tricky to manage, especially in strong winds. The LEASH BELT is made to attach your wing or board leash when wing, surf or SUP foiling. It has a very strong construction and provides multiple attachment points. Do not use for kite or snowkite. Connect every gear in one place!Make sure you connect the wing on the front and the board on the back.* The hook is not included with the leashbelt. S = 65-82cm / M = 80-95cm / L = 93-110cm