NAISH Jet Foil Semi Complete 2022
€656.00*
Ready to ship, estimated delivery time: 2-5 workdays
Product information "NAISH Jet Foil Semi Complete 2022"
2022/23 Naish Jet Foil Series for maximum performance
There are three versions:
- Jet Foil HA (High Aspect) Semi Complete
- Jet Foil MA (Medium Aspect) Semi complete
- Jet Foil Standard (Low Aspect) Semi Complete
Here are the main differences between these models.
- High Aspect (HA) Foil:
- High aspect foils typically have longer wings with a narrower chord (width) and a higher aspect ratio (length to width ratio).
- These foils are known for providing greater efficiency and speed, making them suitable for advanced users and those looking for maximum performance.
- High aspect foils are often preferred for racing and advanced foiling maneuvers due to their reduced drag and improved lift-to-drag ratio.
- Medium Aspect (MA) Foil:
- Medium aspect foils strike a balance between the characteristics of high and low aspect foils.
- They are versatile and can cater to a wider range of riders, offering a good compromise between stability, speed, and maneuverability.
- Medium aspect foils are suitable for intermediate foilers who want a balance of performance and control.
- Low Aspect (LA) Foil:
- Low aspect foils typically have shorter wings with a wider chord, resulting in a lower aspect ratio.
- These foils are known for providing more stability and ease of use, making them suitable for beginners and those who prioritize comfort over maximum speed.
- Low aspect foils are often chosen for learning to foil and for cruising at lower speeds.
When comparing the 2022 Naish Jet Foil HA, MA, and Standard models, you can expect the High Aspect to prioritize performance and speed, the Medium Aspect to offer a balance of features, and the Standard (Low Aspect) to focus on stability and ease of use.
The high number (for example 1600) gives you the surface of the front wing in cm2.
Scope of delivery:
Jet front wing + EVA cover
Stabilizer Jet HA + EVA cover
Fuselage
Carrying case
Torx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Similar Items
Jet 1050 + 1250 Delta wing shape with medium aspect ratio and moderate anhedralsOptimal combination of early lift, speed and turning abilityDisciplines from windsurfing, wing surfing to downwind kitefoiling and foil surfing in faster, steeper surfExcellent option for light wind kitefoiling and windsurf foiling on crossover boardsStabilizer 320 Back Wing: more intuitive turning and response when pumpingUltralight and stableJet 1650, 2000 + 2450 Many similar features to their smaller counterpartsSlightly higher aspect ratio in a delta wing shape with moderate inflowOptimal combination of early lift, speed and maximum turning abilityFor larger surfers surf foiling, SUP, downwind and wing surf foilingStabilizer 450 Back Wing: More lift at lower speeds and improved turning and pumping performanceUltra light and stableTechnologyNaish aluminium masts are available as Direct Connect as well as Deep Tuttle and Abracadabra connection systemsLightweight, foam filled, triple extruded aluminium mast with bonded and bolted joints100% pre-impregnated, high gloss 3K carbon fibre front wings and stabilisersCNC-machined lightweight aluminium fuselage with corrosion-resistant M6 stainless steel helicoilsStainless steel for connecting the front wing and tail unitStainless steel M6 Torx T30 hardware for all screw connectionsScope of deliveryJet HA front wing + EVA coverStabilizer Jet HA + EVA coverFuselageCarrying caseTorx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)Optimal combination of early lift, speed and turning abilityDisciplines from windsurfing, wing surfing to downwind kitefoiling and foil surfing in faster, steeper surfExcellent option for light wind kitefoiling and windsurf foiling on crossover boardsStabilizer 320 Back Wing: more intuitive turning and response when pumpingUltralight and stableJet 1650, 2000 + 2450 Many similar features to their smaller counterpartsSlightly higher aspect ratio in a delta wing shape with moderate inflowOptimal combination of early lift, speed and maximum turning abilityFor larger surfers surf foiling, SUP, downwind and wing surf foilingStabilizer 450 Back Wing: More lift at lower speeds and improved turning and pumping performanceUltra light and stableTechnologyNaish aluminium masts are available as Direct Connect as well as Deep Tuttle and Abracadabra connection systemsLightweight, foam filled, triple extruded aluminium mast with bonded and bolted joints100% pre-impregnated, high gloss 3K carbon fibre front wings and stabilisersCNC-machined lightweight aluminium fuselage with corrosion-resistant M6 stainless steel helicoilsStainless steel for connecting the front wing and tail unitStainless steel M6 Torx T30 hardware for all screw connectionsScope of deliveryJet HA front wing + EVA coverStabilizer Jet HA + EVA coverFuselageCarrying caseTorx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Jet 1050 + 1250 Delta wing shape with medium aspect ratio and moderate anhedralsOptimal combination of early lift, speed and turning abilityDisciplines from windsurfing, wing surfing to downwind kitefoiling and foil surfing in faster, steeper surfExcellent option for light wind kitefoiling and windsurf foiling on crossover boardsStabilizer 320 Back Wing: more intuitive turning and response when pumpingUltralight and stableJet 1650, 2000 + 2450 Many similar features to their smaller counterpartsSlightly higher aspect ratio in a delta wing shape with moderate inflowOptimal combination of early lift, speed and maximum turning abilityFor larger surfers surf foiling, SUP, downwind and wing surf foilingStabilizer 450 Back Wing: More lift at lower speeds and improved turning and pumping performanceUltra light and stableTechnologyNaish aluminium masts are available as Direct Connect as well as Deep Tuttle and Abracadabra connection systemsLightweight, foam filled, triple extruded aluminium mast with bonded and bolted joints100% pre-impregnated, high gloss 3K carbon fibre front wings and stabilisersCNC-machined lightweight aluminium fuselage with corrosion-resistant M6 stainless steel helicoilsStainless steel for connecting the front wing and tail unitStainless steel M6 Torx T30 hardware for all screw connectionsScope of deliveryJet HA front wing + EVA coverStabilizer Jet HA + EVA coverFuselageCarrying caseTorx screwdriver and required screws (5x 20 mm M6/4x 30 mm M6 + T Nuts)
Customers also bought
Feature 130cm length (unstretched) Feature Soft touch, lightweight material Feature Double lock carabiner with swivel (1100kg) Feature Mystic 2.0 compact quick release Feature Neoprene carabiner cover Feature Designed for unhooked / freestyle performance
Carbon 35 Masts 75 cm, 85 cm, 95 cm, 105 cm The new Naish C35 monocoque composite mast with its integral molded base features 35% UD carbon content and strikes the perfect balance of technology and performance at a great price. Weight is kept to a minimum thanks to a dual expanding foam core, and the smaller profile (shared with the C100 mast) reduces drag dramatically. Corrosion issues are completely eliminated thanks to (2) 12 mm stainless steel inserts laminated into the mast structure and paired with our molded fuselage connector that acts as a corrosion barrier.